The Shineyoo Silicone Vacuum Tubing Hose is a flexible silicone hose set intended for general-purpose air or water transportation in automotive, marine, industrial, and DIY applications. Each set includes five hose sizes, with every hose measuring 6.6 feet in length. The range of inner diameters is designed to accommodate different connections and routing requirements, while the 3 mm wall thickness is intended to help reduce collapsing and kinking during use.
Quick Overview
This hose assortment is intended for applications such as engine-bay vacuum lines, custom turbo or intercooler piping fabrication, intake projects, and radiator cooling-system work. It is made from silicone and has a stated temperature range of -76°F to 392°F, or -60°C to 200°C. The manufacturer lists a working pressure of 43 PSI and burst-pressure figures of 100 PSI at high temperature and 130 PSI at room temperature.
| Product Type | Silicone vacuum tubing hose set |
|---|---|
| Brand | Shineyoo |
| Material | Silicone |
| Hose Length | 6.6 feet per hose |
| Included Sizes | 1/8 inch, 5/32 inch, 1/4 inch, 5/16 inch, and 3/8 inch inner diameter |
| Wall Thickness | 3 mm |
| Working Pressure | 43 PSI |
| Burst Pressure | 100 PSI at high temperature; 130 PSI at room temperature |
| Temperature Range | -76°F to 392°F (-60°C to 200°C) |
| Intended Media | General-purpose air or water transportation |
What the Hose Set Includes
The set contains five separate silicone hoses. Each hose is 6.6 feet long, but the inner and outer diameters vary by size. The available dimensions are:
- 1/8-inch inner diameter: 3 mm inner diameter and 9 mm outer diameter
- 5/32-inch inner diameter: 4 mm inner diameter and 10 mm outer diameter
- 1/4-inch inner diameter: 6 mm inner diameter and 12 mm outer diameter
- 5/16-inch inner diameter: 8 mm inner diameter and 14 mm outer diameter
- 3/8-inch inner diameter: 10 mm inner diameter and 16 mm outer diameter
Having multiple inner diameters in one set can be useful when a project includes fittings, ports, or hose connections of different sizes. Correct sizing remains important. The hose should fit securely over the intended connection, and the dimensions of the original hose or fitting should be checked before cutting or installing a replacement.
Construction and Temperature Range
The tubing uses a 3 mm wall thickness. The manufacturer describes the construction as an upgraded silicone tube intended to help prevent collapsing and kinking. These characteristics may be useful when the hose needs to follow bends or pass through a confined engine-bay area, although the final routing should still avoid sharp bends, abrasion, and contact with components that could damage the material.
The stated operating temperature range is -76°F to 392°F, equivalent to -60°C to 200°C. This range provides a reference for the environments the hose is designed to handle, but actual suitability depends on the temperature at the installation point and the surrounding conditions. Areas near exhaust components or other intense heat sources should be evaluated carefully rather than judged by ambient engine-bay temperature alone.
Pressure Ratings Explained
Three pressure figures are provided for this hose. The stated working pressure is 43 PSI. Burst pressure is listed as 100 PSI at high temperature and 130 PSI at room temperature. These figures should not be treated as interchangeable.
- Working pressure: The listed pressure for normal operation is 43 PSI.
- Burst pressure at high temperature: The listed burst figure is 100 PSI.
- Burst pressure at room temperature: The listed burst figure is 130 PSI.
Temperature can affect hose performance and pressure capacity, which is why the figures differ. For a project involving pressurized air or water, the normal operating pressure, maximum temperature, connection method, and routing conditions should all remain within appropriate limits. The burst-pressure figure should not be used as a normal operating target.
Common Applications
The hose is described for general-purpose air or water transportation and a range of automotive, marine, industrial, and DIY uses. Potential applications include:
- Replacing suitable vacuum hose sections in an engine bay
- Routing air in automotive systems
- Custom turbo or intercooler piping fabrication
- DIY intake projects
- Radiator cooling-system projects where the hose specifications are appropriate
- General-purpose marine or industrial air and water routing
These applications do not mean the tubing is automatically compatible with every vehicle system or fluid. Before installation, compare the required inner diameter, outer diameter, pressure, temperature, and transported medium with the project requirements. Product information identifies air and water transportation, so other fluids should not be assumed to be suitable without confirmation.
Installation Considerations
Silicone tubing can be cut to the length required for a particular routing layout. Measuring the original section or the connection points first can help reduce waste and improve fit. A clean, square cut is generally preferable to a slanted or crushed end because the hose needs to sit evenly on the fitting.
The correct inner diameter is one of the most important details. A hose that is too loose may not seal properly, while one that is too small may be difficult to install or place unnecessary stress on the connection. Depending on the application, clamps or other retaining hardware may be needed, but the appropriate connection method is not specified for every possible use.
After installation, inspect the routing for kinks, rubbing, sharp edges, and excessive heat exposure. The hose should not be forced into a bend tighter than the installation allows. Connections should also be checked periodically in applications where vibration, temperature changes, or pressure fluctuations are present.
Who May Find This Set Suitable?
This assortment may be suitable for vehicle owners, mechanics, fabricators, and DIY users who need several hose sizes for one project or want replacement tubing available for future repairs. The five 6.6-foot lengths provide more flexibility than a single pre-cut section when multiple lines need to be measured and trimmed.
It may be less suitable when a project requires a specialized hose with confirmed resistance to fuel, oil, refrigerant, aggressive chemicals, or other media. The stated application is general-purpose air or water transportation, and no additional chemical-compatibility information is provided.
Details to Check Before Choosing
- Measure the required inner diameter rather than relying only on the appearance of the original hose.
- Confirm that the 3 mm wall thickness works with the available space and fittings.
- Compare the system’s normal pressure with the listed 43 PSI working pressure.
- Consider the highest temperature at the installation point, not just the general temperature of the surrounding area.
- Verify that the application involves air or water transportation.
- Check whether clamps, fittings, or other installation hardware are needed for the specific connection.
Frequently Asked Questions
How many hose sizes are included?
The set includes five sizes: 1/8 inch, 5/32 inch, 1/4 inch, 5/16 inch, and 3/8 inch inner diameter.
How long is each hose?
Each of the five hoses is listed as 6.6 feet long.
What is the hose made from?
The tubing is made from silicone and has a stated wall thickness of 3 mm.
What temperatures are listed for the tubing?
The stated temperature range is -76°F to 392°F, or -60°C to 200°C.
Can it be used for any automotive fluid?
The described applications cover general-purpose air or water transportation. Compatibility with fuel, oil, refrigerant, chemicals, or other fluids should not be assumed without separate confirmation.
For the latest product information and specifications, view the current product listing.
Final Thoughts
The Shineyoo Silicone Vacuum Tubing Hose is a multi-size silicone tubing set for general-purpose air and water routing. Its five inner-diameter options, 6.6-foot hose lengths, 3 mm wall thickness, and stated temperature and pressure ratings provide useful reference points when planning an automotive, marine, industrial, or DIY project. The key checks before installation are correct sizing, operating pressure, temperature exposure, routing conditions, and compatibility with the transported medium.