The VEVOR Steel Electrical Box is a wall-mountable metal enclosure designed to house electrical components, cables, and power supplies in indoor or outdoor installations. It combines a 0.059-inch, or 1.5 mm, cold-rolled steel body with a galvanized mounting plate, a sealed hinged door, and bottom cable outlet holes. The enclosure is intended for home, industrial, commercial, and agricultural electrical projects where organized component placement and protection from dust and water are important.
Quick Overview
This VEVOR electrical enclosure uses precise cutting and welding to form a sturdy steel cabinet. An epoxy polyester powder coating helps provide wear resistance and corrosion protection, while the PU sealing strip creates a tight closure around the door. The removable mounting plate can be taken out while components are arranged, and four mounting holes on the back support wall installation.
| Product Type | Steel electrical enclosure box |
|---|---|
| Brand | VEVOR |
| Body Material | 0.059-inch (1.5 mm) cold-rolled steel |
| Mounting Plate | Detachable galvanized plate |
| Protection Rating | IP66 dust and water resistance |
| Installation | Wall mounting through four rear holes |
| Cable Access | Pre-drilled bottom outlet holes |
What Is the VEVOR Steel Electrical Box?
The enclosure provides a contained space for mounting and protecting electrical equipment. Instead of installing components directly against a wall or leaving wiring exposed, the cabinet gives them a dedicated metal housing with an access door. Its internal mounting plate is designed for securing electrical components, cables, and power supplies in an organized arrangement.
The box is available in multiple specifications. Because the outlet-hole size varies by specification, the selected size should be checked carefully before installation. Internal clearance, component layout, cable routing, and the available wall space all affect which version is appropriate for a particular project.
Construction and Protection
The cabinet is made from 0.059-inch cold-rolled steel. The body uses precise cutting and welding, which gives the enclosure a formed structure for electrical installations. Its surface has an epoxy polyester powder coating intended to improve wear resistance and help protect against corrosion.
A PU sealing strip is fitted inside the enclosure. When the door is closed, this strip helps create a tight seal and is designed to direct rainwater away from the cabinet. The product is listed with an IP66 dust and water resistance rating. This makes the sealing system an important part of the overall design, particularly when the box is installed where dust, rain, or changing weather conditions may be present.
The protection rating applies to the enclosure as designed. Cable entries, added fittings, installation practices, and the way the door is closed can all affect the finished installation. Any electrical work should follow applicable local requirements and be performed by someone qualified for the task.
Key Features
- Cold-rolled steel body: The 1.5 mm construction provides a substantial metal enclosure for mounted electrical equipment.
- Powder-coated finish: The epoxy polyester coating is intended to resist wear and help protect the surface from corrosion.
- Sealed hinged door: A PU sealing strip helps close the cabinet tightly and manage water around the door area.
- IP66 protection: The enclosure is listed for dust and water resistance.
- Detachable mounting plate: The galvanized plate can be removed to make component placement and wiring work more manageable.
- Bottom cable outlets: Pre-drilled holes provide entry and exit points for wiring, with sizes varying by selected specification.
- Four rear mounting holes: The back of the box is prepared for wall installation.
- Reinforced hinges: High-strength metal hinges support door operation and are designed to resist damage under pressure.
Installation and Internal Layout
The removable galvanized mounting plate is one of the more practical design elements. Components can be positioned on the plate before it is secured inside the cabinet, which may make layout work easier than mounting everything directly inside a fixed shell. It also allows the installer to plan cable routes and component spacing before completing the enclosure assembly.
The four rear holes are intended for fixing the box to a wall. The mounting surface should be able to support the enclosure and its contents, and the box should be positioned where the door can open fully for inspection or maintenance. The supplied product information does not specify the mounting hardware, so the hardware and wall suitability should be confirmed for the installation surface.
Bottom outlet holes help keep cable routing more organized. Their dimensions vary between product specifications, so cable diameter, glands, conduit fittings, and the number of wires should be considered before selecting a version. Smooth, properly protected cable entry is important because unfinished openings can compromise sealing and may damage insulation.
Common Applications
The VEVOR Steel Electrical Box is intended for a range of electrical projects in indoor and outdoor settings. Suggested application areas include home, industrial, commercial, and agricultural installations. It may be used where electrical components need to be gathered in one enclosure and protected from environmental exposure.
- Organizing electrical components on a wall-mounted backplate
- Housing cables and power supplies in a dedicated cabinet
- Supporting electrical projects in workshops, facilities, and utility areas
- Providing a contained enclosure for selected indoor or outdoor installations
- Helping keep wiring and mounted equipment separated from the surrounding environment
The enclosure itself does not define which electrical devices can be installed inside. Component dimensions, heat requirements, voltage requirements, wiring methods, and applicable codes must be assessed separately for each project.
Things to Check Before Choosing a Size
Since the enclosure comes in multiple specifications, size selection is a central consideration. The outside dimensions alone are not enough to determine whether a cabinet will work for a particular installation. Check the internal space available for the planned components, wiring bends, mounting points, and service access.
- Component clearance: Confirm that all intended devices fit on the mounting plate without crowding.
- Cable entry: Compare the bottom outlet-hole size with the planned cable or conduit fittings.
- Wall space: Measure the installation area and leave room for opening the hinged door.
- Environmental exposure: Consider whether the selected protection rating and installation method meet the project requirements.
- Grounding and electrical safety: Plan the installation according to applicable electrical regulations and the requirements of the equipment being installed.
- Maintenance access: Leave enough working room to inspect, adjust, or replace components later.
Frequently Asked Questions
Is the VEVOR Steel Electrical Box suitable for outdoor use?
The enclosure is described for indoor and outdoor applications and has an IP66 dust and water resistance rating. Outdoor performance depends on correct installation, cable entry treatment, door closure, and the conditions at the installation site.
What material is used for the enclosure?
The body is made from 0.059-inch, or 1.5 mm, cold-rolled steel. It has an epoxy polyester powder coating intended to improve wear resistance and corrosion protection.
Can the internal mounting plate be removed?
Yes. The galvanized mounting plate is detachable. This allows electrical components and wiring to be arranged on the plate before it is placed inside the enclosure.
How is the box mounted?
The rear of the enclosure has four wall-mounting holes. The appropriate mounting hardware is not specified here, so it should be selected for the wall material, enclosure load, and installation conditions.
Are the bottom cable outlets the same on every version?
No. The outlet-hole size varies by product specification. Check the dimensions for the selected version against the cable, conduit, or fitting requirements before installation.
For the latest product information and specifications, view the current product listing.
Final Thoughts
The VEVOR Steel Electrical Box is a powder-coated cold-rolled steel enclosure with a detachable galvanized mounting plate, sealed hinged door, bottom cable outlets, and four rear wall-mounting holes. Its IP66 dust and water resistance rating and range of available specifications make it applicable to various indoor and outdoor electrical projects. The most important checks before installation are the selected enclosure size, internal component clearance, cable-entry dimensions, wall-mounting requirements, and the electrical safety rules that apply to the project.