The Kingston Brass 60-Inch Acrylic 3-Wall Alcove Tub with Right Hand Drain Hole is a white acrylic bathtub designed for installation between three finished walls. Its 60-inch length, integrated apron, right-hand drain placement, and tile flange make it suited to bathroom layouts planned around a three-wall alcove configuration.
The tub has a 32-inch width and a height of 21-5/8 inches. Its water depth reaches 14-3/16 inches to the overflow, and the stated capacity is 58.2 gallons. A glossy white finish covers the exposed sides, providing a straightforward appearance for bathrooms using light or neutral fixtures and wall finishes.
Quick Overview
This alcove bathtub combines an acrylic shell with an apron front and an integrated tile flange for a more defined installation arrangement. The right-handed drain location is an important layout detail because it determines where the plumbing connection must be positioned when the tub is viewed from the intended installation side.
| Product Type | Three-wall alcove bathtub with apron |
|---|---|
| Brand | Kingston Brass |
| Material | Acrylic |
| Dimensions | 60 inches long x 32 inches wide x 21-5/8 inches high |
| Water Depth | 14-3/16 inches to overflow |
| Capacity | 58.2 gallons |
| Drain Placement | Right hand |
| Finish | Glossy white on exposed sides |
| Faucet Configuration | Ready for a wall-mount tub filler |
What Is This Alcove Tub?
An alcove tub is installed against three surrounding walls, typically with the long sides and back positioned within a framed bathroom enclosure. This arrangement can help define the bathing area while leaving the front apron visible. The apron on this model provides a finished front-facing surface, so a separate decorative panel is not described as necessary for the exposed front.
The tub also includes a tile flange for the three-wall alcove installation. A tile flange is designed to provide an edge where surrounding waterproofing and wall tile can be planned around the tub. Proper installation still requires careful attention to the bathroom’s framing, waterproofing, flooring, drain plumbing, and local building requirements.
Construction and Finish
The bathtub uses acrylic construction. The supplied specifications identify different acrylic thicknesses across several areas:
- Inner tub: 3.5 millimeters
- Bottom: 16 millimeters
- Wall: 5 millimeters
- Rim: 9 millimeters
These measurements describe the construction details supplied for the tub and can be useful during project planning or when comparing replacement units. The exposed sides are finished in brilliant glossy white. This finish can coordinate with a range of bathroom styles, although surrounding tile, trim, and plumbing finishes will determine the overall appearance.
Size, Capacity, and Drain Layout
The 60-inch length is a common size for alcove bathtub planning, but the complete outside dimensions remain important. This model measures 60 inches long, 32 inches wide, and 21-5/8 inches high. The 32-inch width should be considered alongside the actual framed opening, wall surfaces, tile build-up, and any required clearance around the tub.
The stated water depth is 14-3/16 inches to the overflow, with a listed capacity of 58.2 gallons. Capacity figures generally refer to the tub’s water-holding volume and should not be treated as a precise indication of the amount used during every bath. The usable fill level will be limited by the overflow and by the occupant’s displacement.
The right-hand drain placement is one of the most important installation characteristics. Before selecting this tub for a renovation, confirm which side is considered the right-hand side in the planned layout. Drain orientation should be coordinated with existing or planned waste plumbing rather than assumed from the position of the bathroom entrance or faucet.
Installation Features to Review
The three-wall configuration and tile flange make this tub intended for a specific alcove arrangement. Before installation, the bathroom opening should be checked against the tub’s length, width, and height. Small differences in framing or finished wall thickness can affect how the unit fits once backer board, tile, mortar, or other wall materials are added.
The tub is described as ready for a wall-mount tub filler. This identifies the intended faucet arrangement, but it does not provide details about a particular filler, valve, trim set, or plumbing connection. Those components should be selected and positioned separately according to the bathroom design and applicable installation requirements.
Drain and overflow components are not fully detailed in the supplied information for this product. Confirm which plumbing parts are included with the specific unit and which must be obtained separately before beginning the project. The waste-and-overflow assembly must match the tub’s drain location and be installed with appropriate seals.
Who It May Be Suitable For
This bathtub may be suitable for homeowners, designers, and contractors planning a standard-length three-wall alcove installation with plumbing on the right side. The apron front can be useful where the front of the tub will remain exposed, while the glossy white finish offers a neutral base for many bathroom layouts.
It may also be considered for a replacement project when the existing opening accommodates the stated 60-by-32-inch footprint and the drain is already positioned on the right. Even in a replacement, the finished dimensions should be measured carefully because wall coverings and flooring can change the available space.
Things to Consider Before Installation
- Measure the finished opening: Compare the tub dimensions with the space after accounting for wall and floor finishes.
- Confirm drain orientation: Make sure the existing or planned drain connection corresponds to the right-hand layout.
- Plan waterproofing: Coordinate the tile flange, wall backer materials, sealants, and surrounding waterproofing system.
- Check access: Consider how the tub will be moved into the bathroom and positioned within the alcove.
- Review plumbing components: Verify the drain, overflow, wall-mount filler, valve, and other required parts before installation.
- Protect the acrylic surface: Use installation materials and cleaning products that are appropriate for acrylic and avoid abrasive treatment of the finished surface.
The specifications provided do not identify a warranty, weight, leveling system, support structure, or complete list of included hardware. Those details should be confirmed before finalizing the installation plan, especially when the bathtub is being used in a full bathroom remodel.
Frequently Asked Questions
What kind of installation is this tub designed for?
It is designed for a three-wall alcove installation and includes a tile flange for that arrangement. The front includes an apron, which leaves a finished panel visible when the tub is installed.
Where is the drain located?
The drain is positioned on the right-hand side. The planned bathroom layout should be checked carefully so the drain plumbing aligns with this orientation.
What are the bathtub’s dimensions?
The stated overall dimensions are 60 inches long, 32 inches wide, and 21-5/8 inches high.
How deep is the tub?
The water depth is listed as 14-3/16 inches to the overflow. The stated capacity is 58.2 gallons.
Can a wall-mount tub filler be used?
The tub is described as ready for a wall-mount tub filler. The filler, valve, and related plumbing components should be reviewed separately for compatibility with the planned bathroom installation.
For the latest product information and specifications, view the current product listing.
Final Thoughts
The Kingston Brass 60-Inch Acrylic 3-Wall Alcove Tub with Right Hand Drain Hole is a 60-inch acrylic alcove bathtub with an apron, tile flange, glossy white exposed surfaces, and right-hand drain placement. Its main planning considerations are the 60-by-32-inch footprint, 21-5/8-inch height, 14-3/16-inch water depth, and compatibility with a three-wall alcove and wall-mount filler arrangement. Careful measurement and plumbing coordination are important before installation.