The Simple Dimmer by Deako is a white wall dimmer designed to adjust the brightness of compatible lighting. It combines a smooth sliding control with a separate rocker switch for turning lights on and off. A trim wheel positioned beneath the rocker switch lets users adjust the minimum dimming level, which can help prevent lights from becoming too dim for a particular room or bulb.
Quick Overview
The dimmer is intended for use with dimmable incandescent, halogen, LED, ELV, and MLV loads within its stated capacity limits. It works most directly in single-pole circuits, where one switch controls the lights, and it can also be used in certain multiway arrangements when the other switches are Deako Simple Rocker Switches. Installation requires a Deako Backplate with a neutral wire connection.
| Product Type | Wall dimmer switch |
|---|---|
| Brand | Deako |
| Color | White |
| Controls | Slide dimmer and rocker switch |
| Lighting Compatibility | Dimmable incandescent, halogen, LED, ELV, and MLV loads |
| Load Capacity | 600W incandescent/halogen; 150W LED/ELV/MLV |
| Circuit Use | Single-pole and selected multiway applications |
| Neutral Wire | Required at the Deako Backplate |
How the Simple Dimmer Works
The main control is a sliding dimmer. Moving the slider changes the light level across its adjustment range, allowing the room to be brighter for general activities or lower for a softer setting. The rocker switch provides a familiar on-and-off control, so brightness adjustment and power control are handled separately.
The trim wheel under the rocker switch is intended to set the lowest usable brightness level. This adjustment can be useful when a dimmable bulb flickers, turns off, or becomes too faint at the bottom of the slider range. The product information identifies the trim wheel as a way to adjust minimum dimness, but the correct setting may depend on the connected bulb and lighting load.
Lighting Compatibility and Capacity
The Simple Dimmer is designed for dimmable bulbs and lighting loads. It supports incandescent and halogen loads up to 600 watts, as well as LED, ELV, and MLV loads up to 150 watts. The connected bulbs must themselves be rated for dimming. A standard non-dimmable bulb should not be treated as compatible simply because it is connected to a dimmer switch.
LED compatibility can depend on the specific bulb and fixture combination. If a lighting setup produces flickering, buzzing, limited dimming, or an unexpected shutoff, check the bulb manufacturer’s dimmer compatibility guidance and confirm that the total load remains within the stated limit.
Circuit and Wiring Requirements
The dimmer works best in a single-pole circuit, where one switch operates the lights. It may also be used in a multiway circuit, including arrangements controlled from more than one location, when the other switches are Deako Simple Rocker Switches. This requirement is important because a conventional switch at another location may not provide the intended operation.
A neutral wire connection is required at the Deako Backplate where the Simple Dimmer is installed. The presence, location, and condition of wiring can vary between homes. Before choosing the switch, confirm that the installation location has the required neutral connection and that the circuit arrangement meets Deako’s requirements.
Electrical work should be approached cautiously. Although the product information describes a simplified installation system and includes a protection claim, household wiring can still present serious hazards. Power should be disconnected at the circuit breaker before work, and a qualified electrician should be used when the wiring is unclear or the installation involves a complex circuit.
Room Applications
Deako identifies the Simple Dimmer as suitable for cozy spaces such as bathrooms, offices, and nurseries. In these settings, adjustable lighting can support different activities without requiring separate fixtures or multiple lighting zones.
- Bathroom: A lower setting may provide softer illumination, while a brighter level can be used for routine tasks.
- Office: The slider allows the lighting level to be adjusted for focused work or a less intense atmosphere.
- Nursery: A dimmed setting may be useful when a softer light level is preferred.
These examples describe intended locations rather than a guarantee that the dimmer will suit every fixture in those rooms. The bulb type, total wattage, circuit configuration, and available wiring should all be checked first.
Installation Considerations
The Simple Dimmer is part of the Deako installation system and is fitted at a Deako Backplate. This system-based design means the backplate and wiring are central to compatibility. If a suitable Deako Backplate is not already installed, the installation may involve additional work beyond replacing a conventional wall switch.
Before installation, identify the circuit type and determine whether one switch or multiple switches control the light. For multiway use, confirm that the other switches are Deako Simple Rocker Switches. Also check the connected bulbs and calculate the total lighting load, keeping incandescent and halogen loads within 600 watts and LED, ELV, and MLV loads within 150 watts.
Dimensions, terminal layout, included installation hardware, and detailed wiring instructions are not specified here, so those details should be confirmed in the manufacturer’s instructions before installation. Wall-box space and cover-plate fit should also be checked when replacing an existing switch.
Who It May Be Suitable For
The Simple Dimmer may suit homeowners or installers who want a manual dimmer with a dedicated on-and-off rocker and a way to fine-tune the minimum brightness. It may also be useful when several rooms use the same Deako system and consistent switch operation is preferred.
It may be less suitable for a location without a neutral wire at the required Backplate, a setup using non-dimmable bulbs, or a multiway circuit that includes conventional switches rather than the specified Deako Simple Rocker Switches. It is also not presented as a smart or app-controlled dimmer, so those seeking remote control should examine other product options.
Important Details to Check
- Confirm that the bulbs or fixtures are dimmable.
- Verify the total load does not exceed the stated wattage limits.
- Check for a neutral wire connection at the Deako Backplate.
- Identify whether the circuit is single-pole or multiway.
- For multiway circuits, confirm that the other switches are Deako Simple Rocker Switches.
- Review current installation instructions for wiring, mounting, and safety requirements.
Frequently Asked Questions
Does the Simple Dimmer require a neutral wire?
Yes. A neutral wire connection is required at the Deako Backplate where the dimmer is installed.
What bulbs can the dimmer control?
It is designed for dimmable incandescent, halogen, LED, ELV, and MLV loads. The stated capacity is up to 600 watts for incandescent and halogen loads, and up to 150 watts for LED, ELV, and MLV loads.
Can it be used in a three-way or four-way circuit?
It can be used in multiway circuits when the other switches are Deako Simple Rocker Switches. It works best in a single-pole circuit, where one switch controls the lights.
What does the rocker switch do?
The rocker switch turns the connected lights on or off. The separate slider adjusts the brightness when the lights are on.
What is the trim wheel used for?
The trim wheel beneath the rocker switch adjusts the minimum dimming level. It can help set the lowest brightness that works appropriately with the connected lighting load.
For the latest product information and specifications, view the current product listing.
Final Thoughts
The Simple Dimmer by Deako combines a sliding brightness control, rocker-style on-and-off switch, and adjustable minimum dimness setting in a single wall control. Its main selection requirements are the use of dimmable bulbs, adherence to the stated load limits, and compatibility with the Deako Backplate and wiring. Single-pole installations are the most straightforward use case, while multiway installations require Deako Simple Rocker Switches at the other control points. Checking the circuit, neutral wire, lighting load, and installation instructions before work can help determine whether it fits a particular lighting setup.