The Artiwell Tub Drain Linkage Assembly is a replacement part designed to repair a worn-out trip-lever bathtub drain linkage. It is intended for trip lever bath tub waste and overflow drains, and it uses brass construction for strength and everyday durability.
Quick Overview
This tub drain linkage assembly is a focused repair part rather than a full drain kit. It is meant for situations where the linkage inside a trip-lever tub drain no longer operates properly and needs to be replaced. The part is adjustable for certain standard tub drain heights, and an extension linkage rod can be added for taller setups.
| Brand | Artiwell |
|---|---|
| Product Type | Tub drain linkage assembly |
| Material | Brass |
| Compatibility | Trip lever bath tub waste and overflow drain |
| Adjustable Height | 13-1/4 in to 15-1/4 in |
| Standard Fit Range | 14 in to 16 in trip lever bath tub drain |
| Extended Fit Range | 22 in to 24 in height trip lever bath tube with 8 in extension rod |
| Diameter | 1-5/16 in |
| Included | Linkage assembly only |
What This Part Does
A trip-lever bathtub drain uses a linkage assembly to open and close the waste and overflow mechanism. When that internal linkage wears out, bends, or stops working correctly, the drain may not open or close as it should. This replacement part is designed to address that specific repair need.
Because it is a linkage assembly only, it is useful when the existing overflow face plate, strainer, and related screws are still in place and do not need to be replaced. That makes it a more targeted option for a partial repair.
Key Details to Know
The listed height adjustment range is one of the most important details for this product. It can be adjusted from 13-1/4 inches to 15-1/4 inches, which is stated to fit standard trip lever bath tub drains from 14 inches to 16 inches.
The product information also notes that an 8-inch extension linkage rod can be added to extend the assembly for taller trip lever bath tubes. With that extension, it is stated to fit drain heights from 22 inches to 24 inches.
Another detail worth checking is the diameter. This assembly is listed at 1-5/16 inches in diameter, and that dimension is specifically tied to trip-lever drain repairs. If fit matters for your tub, this measurement should be compared with the existing part before purchase.
Design and Construction
The assembly is made from brass, which is a common material choice for drain components that need to stand up to repeated use and moisture exposure. In practical terms, brass is often selected for parts that need strength and durability in a bathroom environment.
The product is described as built to last, but the main point from the available details is that the construction is brass and intended for regular use. No other finish, coating, or decorative details are specified for this version.
Installation and Replacement Considerations
This is a repair component, so it is most relevant if you are replacing an existing trip-lever linkage rather than installing a complete new drain system. Since it does not include the overflow face plate, bath drain strainer, or screws, you may need to keep or reuse those parts if they are still serviceable.
If your drain setup is taller than a standard range, the option to add the extension linkage rod may be useful. That said, the correct fit will still depend on the dimensions of the current tub drain and how the existing mechanism is configured.
For home repair projects, it is worth measuring carefully before replacing any drain linkage. Small differences in height and diameter can affect how smoothly the trip lever operates.
When It May Be a Good Fit
This Artiwell linkage assembly may be useful for people who need to restore the function of a trip-lever bathtub drain without replacing the entire overflow and strainer setup. It is also a reasonable option for a straightforward parts-only repair when the surrounding drain hardware is still in acceptable condition.
It may appeal to:
- Homeowners replacing a worn tub drain linkage
- Maintenance work on trip-lever bathtub drains
- Repairs where the overflow face plate and strainer are already being kept
- Projects that need a brass linkage component with adjustable fit
Things to Check Before Buying
The most important step is confirming compatibility with your existing tub drain. This assembly is intended for trip-lever bath tub waste and overflow drains, so it is not a universal fit for every bathtub drain style.
You should also check whether you need only the linkage assembly or a fuller repair kit. Since this version does not include the overflow face plate, bath drain strainer, or screws, it is best suited to partial repairs rather than complete cosmetic replacements.
If your drain height falls outside the standard 14-inch to 16-inch range, the extension rod may help, but only if your installation can accommodate it. Measuring the drain opening and comparing it with the listed dimensions is the safest approach.
Similar Repair Options
Trip-lever bathtub drain repairs are often sold in a few different forms. Some products provide only the linkage assembly, like this one, while others include the face plate and strainer cover as part of a fuller kit. Choosing between them usually depends on how much of the existing drain assembly still works.
A parts-only assembly can make sense when you only need the mechanical linkage. A more complete kit may be more convenient if multiple visible or functional parts also need replacement. The right choice depends on the condition of your current tub drain, not just the replacement part itself.
For the latest product information and specifications, view the current product listing.
Frequently Asked Questions
What does a tub drain linkage assembly do?
It connects the trip lever mechanism to the bathtub drain so the waste and overflow opening can open and close properly. If the linkage is worn or damaged, the drain may not function as intended.
Does this product include the overflow face plate and strainer?
No. The listed product is the linkage assembly only. It does not include the overflow face plate, bath drain strainer, or screws.
Can it fit standard tub drains?
The listed adjustment range is 13-1/4 inches to 15-1/4 inches, and it is stated to fit 14-inch to 16-inch standard trip-lever bath tub drains.
Is there a way to use it with taller tub drains?
Yes. The product information states that an 8-inch extension linkage rod can be added to extend the assembly for trip-lever bath tubes with heights of 22 inches to 24 inches.
What material is it made from?
The assembly is made from brass, which is commonly used for plumbing parts that need strength and durability.
Final Thoughts
The Artiwell Tub Drain Linkage Assembly is a targeted replacement part for trip-lever bathtub drains. Its main strengths are the brass construction, the adjustable height range, and the option to extend the linkage for taller installations. Because it is sold as the linkage only, it is most useful for repairs where the rest of the drain hardware can remain in place.