Auxbeam FA Series 3 Inch LED Pods are compact off-road flood lights designed to provide broad illumination for vehicles, equipment, and outdoor activities. The pair uses automotive-grade P8 LED chips, produces a stated 4,800 lumens, and emits a 6500K white light. Their wide beam pattern is intended to improve visibility across dark, open areas rather than concentrate all of the light into a narrow forward spot.
Quick Overview
These square LED pod lights combine a 3-inch form factor with a maximum beam angle of 60 degrees. A dual-angle lamp cup design helps direct the light, while the included wiring harness and adjustable mounting brackets support installation on compatible 9-36V vehicles and equipment. The lights are rated IP68 for dust and water resistance and use an aluminum housing with an integrated heat sink for managing operating heat.
| Product Type | 3-inch LED flood pod lights |
|---|---|
| Brand | Auxbeam |
| Light Output | 4,800 lumens |
| Color Temperature | 6500K |
| Beam Angle | Up to 60 degrees |
| Operating Voltage | 9-36V |
| Water and Dust Resistance | IP68 |
| Package Contents | Two 3-inch LED lights, DT wiring harness, and mounting accessories |
What These LED Cube Lights Are Designed to Do
The FA Series uses a flood beam to spread light over a wider area. This can be useful when visibility is needed around the vehicle, along a trail, at a campsite, or across an open work area. The stated 60-degree maximum beam angle provides wider coverage than a narrow spot beam, although the actual coverage will also depend on mounting position, aiming, and the surrounding environment.
The lights produce a 6500K color temperature, which is a cool white appearance. The product description also identifies a UV PC lens and a dual-angle lamp cup design. Auxbeam states that this optical arrangement can increase light output by 30 percent. That figure is a manufacturer claim rather than an independent measurement.
Construction and Weather Resistance
The housing uses a thickened all-aluminum shell with a heat sink intended to help dissipate heat from the LEDs. Aluminum is commonly used in auxiliary lighting because it can provide a durable enclosure while transferring heat away from internal components. The product description gives a rated lifespan of more than 50,000 hours, but actual service life can vary with operating conditions, installation, vibration, and electrical setup.
An IP68 rating is provided for protection against dust and water ingress. The lights use a molded rubber seal with a rigid PC frame and PC cover. A small rear breathing vent, referred to by Auxbeam as a “Breathe Part,” is designed to help manage moisture inside the housing. Even with a water-resistance rating, careful installation remains important. Connectors, wiring, and mounting points should be positioned and secured in accordance with the installation instructions.
Installation and Mounting
The set includes a 10-foot DT wiring harness and mounting accessories. The longer cable can provide additional routing flexibility on larger vehicles or when the lights are installed away from the battery and switching point. The product description refers to the wiring setup as plug and play, but installation still requires appropriate placement, electrical connections, and secure mounting.
Each light uses a U-shaped stainless mounting bracket. The bracket allows the beam direction to be changed, which is useful when the lights need to be aimed slightly outward, downward, or toward a particular work area. Before drilling or fastening, check that the chosen location has enough clearance for the light, bracket, cable routing, and any movement caused by vibration or suspension travel.
Because the lights are designed for 9-36V systems, they are intended for a range of vehicles and equipment within that voltage range. Confirm the vehicle’s electrical system and the requirements of the installation before connecting the harness. Local regulations may also control where auxiliary lights can be mounted or how they may be used on public roads.
Common Applications
Auxbeam identifies a broad range of possible applications for these auxiliary lights. They may be used on:
- Jeeps, pickups, trucks, and SUVs
- ATVs and UTVs
- Boats, ships, and other marine equipment
- Motorcycles and racing vehicles
- Tractors and agricultural machinery
- Heavy equipment and outdoor work vehicles
The flood beam may be especially useful where seeing the nearby ground, trail edges, campsite, or work area matters as much as seeing straight ahead. For high-speed driving or long-distance visibility, a spot-beam design may be more appropriate than a wide flood beam. Beam selection should therefore match the intended use rather than relying only on brightness figures.
Who May Find Them Suitable
These LED pods may suit vehicle owners who need supplemental lighting in a compact format and want a pair of lights with wiring and mounting hardware included. They may also appeal to people outfitting equipment used in dark outdoor environments, where a broad beam can help illuminate nearby surroundings.
They are less suited to anyone looking for a narrow, long-distance beam only. The FA Series is identified as a flood-beam product, so its primary function is area illumination. It should also be treated as auxiliary lighting rather than a replacement for a vehicle’s legally required headlights or other original lighting systems.
Things to Consider Before Installation
- Beam purpose: A flood pattern spreads light widely. Check whether broad area coverage or a concentrated forward beam better matches the intended application.
- Electrical compatibility: Confirm that the vehicle or equipment uses a 9-36V system and that the wiring arrangement is suitable.
- Mounting space: Measure the proposed location and check for room around the brackets, connectors, and heat-dissipating housing.
- Aiming: Direct the beam carefully to reduce glare for the operator, passengers, nearby drivers, or other trail users.
- Road-use requirements: Public-road rules for auxiliary lighting vary. Verify local requirements before using the lights on streets or highways.
- Package check: Confirm that both lights, the DT harness, and the mounting accessories are present before beginning installation.
Frequently Asked Questions
What kind of beam do these lights produce?
They produce a wide flood beam with a maximum stated beam angle of 60 degrees. This pattern is intended to illuminate a broader area around the vehicle or equipment.
What color is the light?
The lights use a stated 6500K color temperature, which corresponds to a cool white light.
What vehicles can use these LED pods?
They are specified for 9-36V systems and are listed for use with vehicles and equipment including pickups, trucks, SUVs, Jeeps, ATVs, UTVs, motorcycles, boats, tractors, and agricultural or heavy machinery. Confirm electrical compatibility before installation.
What is included with the set?
The package includes two 3-inch LED work lights, one two-lead DT wiring harness, and a set of mounting accessories.
Are the lights suitable for wet conditions?
The lights carry an IP68 rating and use sealed housing components intended to resist dust and water ingress. Proper connector placement, cable routing, and mounting remain important for dependable operation.
For the latest product information and specifications, view the current product listing.
Final Thoughts
Auxbeam LED Cube Lights Offroad Light Bar LED Pod Lights Square Driving Lights Off Road Lights are represented by a pair of 3-inch flood pods with a cool white 6500K output, a stated 4,800-lumen rating, and coverage up to 60 degrees. Their 9-36V compatibility, adjustable stainless brackets, included wiring harness, aluminum heat-sink housing, and IP68 rating make them suited to a range of off-road vehicles and outdoor equipment. The most important points to confirm before installation are electrical compatibility, mounting clearance, beam aiming, and whether a wide flood pattern fits the intended use.