The Mount-It! Locking RV TV Mount with Dual Wall Plates & Quick Release is designed for RVs, campers, trailers, and similar mobile setups where a television needs to stay secure while traveling and remain flexible when parked. It combines a locking arm, dual wall plates, and full-motion movement so the screen can be positioned for viewing indoors or outdoors, then locked down for transit.
Quick Overview
This Mount-It! RV TV mount is built around two practical needs that often come up in mobile living spaces. First, the TV must stay stable while the vehicle is moving. Second, the screen should be easy to reposition when the setup changes from one viewing area to another. The mount addresses both with a toothed locking mechanism and a quick-release design.
It supports televisions from 13 to 42 inches, up to 33 lbs, and VESA patterns including 75×75, 100×100, 200×100, and 200×200. The arm extends for viewing flexibility and retracts close to the wall when not in use, which helps save space in compact interiors.
| Product Type | RV TV mount |
|---|---|
| Brand | Mount-It! |
| Material | Rust-resistant aluminum |
| Compatibility | 13 to 42 inch TVs, up to 33 lbs |
| VESA Support | 75×75, 100×100, 200×100, 200×200 |
| Motion | Tilt +5°/-15°, swivel +/-90°, extends up to 15.3 inches, retracts to 2.4 inches |
| Application | Indoor and outdoor use in campers, trailers, motorhomes, and RVs |
| Mounting Surfaces | Single wood studs, concrete, or brick |
What This Mount Is Designed to Do
The main purpose of this mount is to hold a TV securely in a mobile environment while still allowing the screen to move when needed. That makes it different from a basic fixed wall bracket. In an RV or trailer, vibration and movement during travel can matter just as much as viewing angle, so the locking joints are an important part of the design.
The dual wall plates also make the setup more flexible. One plate can support an indoor viewing location while the other can support an outdoor area, which may be useful if you want to move the TV between spaces without creating a separate installation each time.
Key Features and Why They Matter
Locking joints for travel
The mount uses a toothed locking system at each joint. In practical terms, that means the arm can be secured in place so the television is less likely to shift during travel. For RV owners, that matters because road vibration can loosen or move a screen if the mount is not designed for mobility.
Dual wall plates
Two wall plates make it possible to relocate the television between mounting points more easily. This can be useful for setups where the same TV is used in different areas, such as inside the RV and under an awning or exterior seating area. It reduces the need to unmount and reinstall the screen from scratch.
Quick-release function
The quick-release design helps simplify removal or relocation of the TV. For a space where storage and setup often change, that can make it easier to take the screen down when traveling or move it when the layout changes.
Rust-resistant aluminum construction
The mount is made from rust-resistant aluminum, which is relevant for RV use because the mount may be exposed to changing weather, humidity, and outdoor air. This material choice is intended to support long-term use in both indoor and outdoor settings.
Full-motion adjustment
The arm tilts +5° and -15°, swivels +/-90°, extends up to 15.3 inches, and retracts to 2.4 inches. These numbers matter because they show how much freedom the mount offers for viewing and space management. A deeper extension can help with angle changes, while a compact retracted profile helps keep the TV close to the wall when space is limited.
Compatibility and Installation Points
This mount supports TVs from 13 to 42 inches and up to 33 lbs. It is compatible with VESA patterns of 75×75, 100×100, 200×100, and 200×200. That makes it suitable for many smaller and mid-size flat-panel televisions, but the screen’s VESA pattern and weight still need to match the mount before installation.
Mounting support includes single wood studs, concrete, and brick surfaces. That gives the mount some flexibility for different RV-related installations and fixed wall setups. As with any wall mount, the surface and fasteners matter, so checking the wall structure before installation is important.
Everyday Use in an RV or Camper
In daily use, this mount is built to help with a few common scenarios. A TV can stay in place while the vehicle is moving, then be adjusted for sitting, cooking, or watching from different parts of the room once parked. If the TV is used outside for a period of time, the dual wall plate layout can make repositioning less cumbersome.
The retractable arm is also useful in compact interiors. When the television is not being watched, pulling it closer to the wall can help preserve walking space and reduce the sense that the screen is taking over the room.
Who It May Be Suitable For
- RV owners who want a locking TV mount for travel
- Camper and trailer users with limited wall space
- People who switch between indoor and outdoor viewing areas
- Anyone with a 13 to 42 inch TV that uses a supported VESA pattern
- Installations where a rust-resistant aluminum mount is preferred
Things to Check Before Buying
Before choosing this mount, it is worth checking a few details on the TV and on the wall where it will be installed:
- TV size and weight: The screen should fall within the 13 to 42 inch range and stay within the 33 lb limit.
- VESA pattern: The TV should match one of the supported patterns, including 75×75, 100×100, 200×100, or 200×200.
- Wall structure: The installation surface should be suitable for the included mounting approach, whether that is wood stud, concrete, or brick.
- Viewing layout: Consider where the TV will sit when extended and where it will rest when retracted, especially in a compact RV interior.
If you are working with a larger screen, a different VESA pattern, or a heavier television, it is better to confirm compatibility first rather than assume the mount will fit.
Design and Practical Trade-Offs
The aluminum construction and locking joints make the mount well suited to mobile use, but the design also reflects the priorities of a compact TV bracket. It is built for a moderate-size screen range rather than large living-room televisions. The 15.3-inch extension offers useful flexibility, though it is still sized for RV and camper environments rather than very wide room layouts.
Because the mount is meant to serve both indoor and outdoor viewing, it focuses on portability and versatility. That makes sense for travel use, but it also means the installation and screen compatibility details matter more than they might with a simple fixed mount.
For the latest product information and specifications, view the current product listing.
Frequently Asked Questions
What size TVs fit this mount?
The mount is designed for TVs from 13 to 42 inches. It also supports televisions up to 33 lbs, so both size and weight should be checked before installation.
What does the locking system do?
The locking system secures the joints of the arm so the mount can stay stable during travel. This is especially relevant in RVs, campers, and trailers where vibration and movement are common.
Can the TV be moved between indoor and outdoor spaces?
Yes. The dual wall plates are intended to make it easier to relocate the TV between different viewing areas, which is useful in RV setups that shift between indoor and outdoor use.
What VESA patterns are supported?
The supported VESA patterns are 75×75, 100×100, 200×100, and 200×200. It is important to confirm that the back of the television matches one of these patterns.
What kind of walls can it be mounted to?
This mount is compatible with single wood studs, concrete, and brick walls. The correct mounting surface and hardware are important for a secure installation.
Final Thoughts
The Mount-It! Locking RV TV Mount with Dual Wall Plates & Quick Release is built for people who need a TV bracket that works in a mobile environment and still offers flexible positioning. Its locking joints, dual wall plates, rust-resistant aluminum construction, and full-motion movement make it a practical option for RV and camper setups where both stability and convenience matter.
For households or travel setups with a compatible 13 to 42 inch television, it offers a focused set of features that are relevant to everyday RV use without adding unnecessary complexity.